您好,欢迎访问杭州金久电器有限公司!

产品展示  Product classification

产品说明 Product description

联系我们   Content us

联系人:汪经理
联系电话:18657179798
地址:浙江省杭州市富阳区东洲街道东洲工业功能区1号;富阳区胥口镇平畈村王家228号(新厂区)

产品展示
您的位置:首页 >> 产品展示 >> 外转子离心风机 >> 浏览产品

该系列离心风机采用交流电容运转异步电机,分为内转子和外传子两大类,风机有两种方式调速,通过可控硅无级调速和电机绕组抽头调速,常规为三档调速;选用先进的技术设计风机,具有安装方便,运行可靠,噪音低,风量大,节能高效等特点;运用多年电机生产的研发技术,消除电机运转时产生的交流电磁噪音,优于同类产品;具有价廉质优的优势。

该系列离心风机主要用于FFU空气过滤单元和空气净化器,空调外机等各设备通风循环换气用途。

电压:单项交流220V/50HZ 可按客户定制不同电压和频率的电机。 可根据客户需求定制四档,五档,调速电机。

离心风机额定风量从200~4000m3/h之间。

电机输出功率范围在5W~200W的微电机。

电机绝缘等级B级、F,内部均有125-135℃热保护器。

电机平均适用寿命30000小时以上,工作方式:S1

电机适用环境温度:-30~60℃。

电机通过欧洲CE认证和中国的CCC认证。

电机使用前,必须将电机接地线与外部接地装置有效连接。

Centrifugal Fan Product Introduction

This series of centrifugal fans uses AC capacitors to operate asynchronous motors, which are divided into two categories: inner rotor and external transmitter. The fan has two modes of speed control, which is controlled by thyristor stepless speed regulation and motor winding tapping. The conventional three-speed adjustment Speed; The use of advanced technology to design the fan, with the advantages of convenient installation, reliable operation, low noise, large air volume, energy saving and high efficiency; using years of research and development technology of motor production, eliminate the AC electromagnetic noise generated during the operation of the motor, superior to similar products. ; Has the advantage of cheap high quality.

This series of centrifugal fans is mainly used for ventilation and air exchange of various equipment such as FFU air filter unit, air purifier, and air conditioner outside machine.

Voltage: Single AC 220V/50HZ, can customize the motor with different voltage and frequency. According to customer needs can be customized fourth gear, five gear, speed motor.

Centrifugal fan rated air flow from 200 to 4000m3/h.

The motor output power ranges from 5W to 200W micromotors.

Motor insulation grade B, F, internal 125-135 °C thermal protector.

The average service life of the motor is more than 30,000 hours. Work mode: S1.

Motor applicable ambient temperature: -30 °C ~ 60 °C.

The motor passed the European CE certification and China's CCC certification.

Before the motor is used, the motor ground wire must be effectively connected to the external grounding device.


返回